When a hot cup of coffee is placed on a cold table, heat transfer primarily occurs through which process?

Correct Answer: B

Rationale: When a hot cup of coffee is placed on a cold table, heat transfer primarily occurs through conduction. Conduction is the process of heat transfer through direct contact between objects at different temperatures. In this scenario, the heat from the hot coffee cup is transferred to the cold table through direct contact, making conduction the primary mode of heat transfer. Choice A (Radiation) is incorrect because radiation is the transfer of heat through electromagnetic waves, which is not the primary mode of heat transfer in this scenario. Choice C (Convection within the coffee) is incorrect because convection is the transfer of heat through the movement of fluids, which is not the primary mode of heat transfer in this scenario. Choice D (A combination of conduction and convection) is incorrect because while convection may play a minor role due to air currents around the cup, the primary mode of heat transfer in this scenario is conduction.

Correct Answer: B

Rationale: In a series circuit, the total resistance is the sum of the individual resistances. Therefore, the total resistance in this circuit is 5 ohms + 5 ohms = 10 ohms. Using Ohm's Law (V = I R), we can find the current (I) by dividing the voltage (V) by the total resistance (R). I = V / R = 100 V / 10 ohms = 10 A. Choice A (2 A) is incorrect because it does not account for the total resistance of the circuit. Choice C (20 A) and Choice D (50 A) are also incorrect as they provide values that are not consistent with the calculations based on the given values in the question.

Correct Answer: C

Rationale: The velocity of an object can be calculated using the formula: final velocity = initial velocity + (acceleration time). In this case, the car starts from rest, so the initial velocity is 0 m/s. Given that the acceleration is 10 m/s² and the time is 5 seconds, we can plug these values into the formula to find the final velocity: final velocity = 0 m/s + (10 m/s² 5 s) = 0 m/s + 50 m/s = 50 m/s. Therefore, the velocity of the car after 5 seconds is 50 m/s. Choice A (2 m/s) and Choice B (5 m/s) are incorrect because they do not consider the acceleration the car undergoes over the 5 seconds, resulting in a final velocity greater than both. Choice D (The answer cannot be determined from the information given) is incorrect as the final velocity can be determined using the provided data and the kinematic equation.

Correct Answer: D

Rationale: When batteries are connected in series, their voltages add up. Therefore, the total voltage of the circuit with four 5 V batteries connected in series will be 5 V + 5 V + 5 V + 5 V = 20 V. Choices A, B, and C are incorrect because the voltages of the batteries add up in series, resulting in a total of 20 V.

Correct Answer: B

Rationale: The radius of a circular track can be calculated using the formula: Circumference = 2 π radius. Given that the circumference of the track is 2,500 m, we can plug this into the formula and solve for the radius: 2,500 = 2 π radius. Dividing both sides by 2π gives: radius = 2,500 / (2 3.1416) ≈ 397.89 m. Therefore, the closest answer is 400 m, making option B the correct choice. Option A (1,000 m) is too large, option C (25 m) is too small, and option D (12 m) is significantly smaller than the calculated radius.

Correct Answer: C

Rationale: The gravitational force between two objects is directly proportional to the product of their masses. When you double the masses of both objects, the force of attraction between them increases by a factor of 2 x 2 = 4. Therefore, the new force of attraction between the two objects will be 12 units x 4 = 24 units. Choices A, B, and D are incorrect because doubling the mass results in a quadruple increase in force, not a linear one.

Correct Answer: B

Rationale: The relationship between acceleration and force is expressed in Newton's second law of motion. This law states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to the object's mass. Mathematically, this relationship is represented as F = ma, where F is the force, m is the mass of the object, and a is the acceleration. Choice A, Newton's first law of motion, also known as the law of inertia, states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an external force. Choice C, Newton's third law of motion, states that for every action, there is an equal and opposite reaction, focusing on the interaction between two objects. Choice D is incorrect because the relationship between acceleration and force is indeed described by one of Newton's laws of motion, specifically the second law.

Correct Answer: C

Rationale: When the box is balanced at the edge of the table, it has potential energy due to its position above the ground. As Peter gives it a push, and it falls 2 meters to the floor, the box then has both kinetic energy (due to its motion) and potential energy (due to gravity). Therefore, the correct statement is that the box had both kinetic and potential energy after it fell. Option A is incorrect because the box retains its energy forms even after hitting the floor. Option B is incorrect as the box has kinetic energy both before and after falling. Option D is incorrect as the box still possesses kinetic energy even after hitting the floor.

Correct Answer: B

Rationale: The frequency of a wave is calculated using the formula: frequency = speed / wavelength. In this case, the speed of the wave is 12 m/s and the wavelength is 2 m. Therefore, the frequency is calculated as 12 m/s / 2 m = 6 Hz. Choice A (38.4 Hz), Choice C (4.6 Hz), and Choice D (3.75 Hz) are incorrect as they do not result from the correct calculation using the given values.