What is the name of the device that separates gaseous ions by their mass-to-charge ratio?

Correct Answer: A

Rationale: A mass spectrometer is a device specifically designed to separate gaseous ions based on their mass-to-charge ratio. This separation process involves ionization, acceleration of the sample, and the deflection of ions in a magnetic field according to their mass-to-charge ratio. The other options, 'interferometer,' 'magnetometer,' and 'capacitance meter,' do not perform the specific function of separating gaseous ions based on their mass-to-charge ratio, making them incorrect choices.

Correct Answer: A

Rationale: The boiling point of water is directly affected by pressure. By lowering the pressure, water can boil at a lower temperature, even at room temperature. This occurs because at lower pressures, the molecules of water have less resistance to escaping into the vapor phase, thus enabling boiling to occur at lower temperatures. Choices B, C, and D are incorrect because increasing the pressure, decreasing the volume, or raising the boiling point would actually require higher temperatures to boil water rather than achieving boiling at room temperature.

Correct Answer: A

Rationale: A colligative property is a property that depends on the number of solute particles in a solution, not on the identity of the solute particles. Freezing point depression is one such property, where adding a solute to a solvent lowers the freezing point of the solution compared to the pure solvent. This phenomenon occurs because the presence of solute particles disrupts the formation of the regular crystal lattice structure, requiring a lower temperature for solidification to occur. Choices B, C, and D are not colligative properties. Viscosity and surface tension are not dependent on the number of solute particles but on intermolecular forces and molecular interactions. Boiling point elevation is another colligative property, but in this case, the question asked for a colligative property of a solution, making freezing point depression the correct answer.

Correct Answer: B

Rationale: Nitrogen is the main component of air, constituting approximately 78% of the Earth's atmosphere. Oxygen, carbon dioxide, and argon are also present in smaller amounts, but nitrogen is the most abundant gas in the air. Therefore, the correct answer is B. Choice A, oxygen, is essential for respiration but makes up only about 21% of the atmosphere. Choice C, carbon dioxide, is vital for photosynthesis but exists in trace amounts in the air. Choice D, argon, is a noble gas found in relatively small quantities in the atmosphere.

Correct Answer: B

Rationale: An exothermic reaction is characterized by the release of heat. During an exothermic reaction, energy is released in the form of heat to the surroundings, resulting in a temperature increase. This distinguishes it from endothermic reactions, which absorb heat from the surroundings. Choice A is incorrect because exothermic reactions do not absorb heat; instead, they release heat. Choice C is incorrect as exothermic reactions do not remain neutral; they involve a net release of energy. Choice D is incorrect as exothermic reactions do not require energy input; instead, they release energy.

Correct Answer: C

Rationale: The correct answer is 'Evaporation.' This phase change occurs when a liquid turns into a gas. During evaporation, molecules gain enough energy to break free from the liquid phase and enter the gas phase, without the need for the liquid to reach its boiling point. Choice A, 'Condensation,' is the opposite phase change where gas turns into a liquid. Choice B, 'Sublimation,' is the phase change from solid directly to gas, skipping the liquid phase. Choice D, 'Melting,' is the phase change from solid to liquid.

Correct Answer: C

Rationale: Specific heat capacity is the amount of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. Among the options provided, aluminum has the smallest specific heat capacity. This means that it requires the least amount of heat to raise its temperature compared to water, wood, and glass. Water has a high specific heat capacity, making it resistant to temperature changes, while wood and glass have higher specific heat capacities compared to aluminum.

Correct Answer: D

Rationale: The correct name for aqueous HI is 'hydriodic acid.' When hydrogen iodide (HI) dissolves in water, it forms hydriodic acid. Therefore, 'hydriodic acid' is the appropriate term for aqueous HI. Choice A, 'hydroiodic acid,' is incorrect as it does not reflect the nature of the compound in the aqueous state. Choice B, 'hydrogen monoiodide,' is not a widely recognized term for this compound. Choice C, 'hydrogen iodide,' is the name for HI in the gaseous state, not when it's dissolved in water.

Correct Answer: A

Rationale: Fluorine has the highest electronegativity among the elements listed. Electronegativity is a measure of an atom's ability to attract and hold onto electrons in a chemical bond. Fluorine, being the most electronegative element on the periodic table, has the strongest ability to attract electrons towards itself compared to chlorine, nitrogen, and oxygen. Therefore, fluorine is the correct answer. Chlorine, nitrogen, and oxygen have lower electronegativities compared to fluorine, making them incorrect choices for the element with the highest electronegativity.