HESI A2
HESI A2 Physics Quizlet Questions
Question 1 of 5
The speed of sound in dry air at 20°C is 343 m/s. If the wavelength of a sound wave is 5 m, what is its frequency?
Correct Answer: C
Rationale: The speed of sound (v) can be calculated using the formula: v = f λ, where f is the frequency and λ is the wavelength. Given that the speed of sound is 343 m/s and the wavelength is 5 m, we can rearrange the formula to solve for frequency: f = v / λ = 343 / 5 = 68.6 Hz. Therefore, the correct frequency is 68.6 Hz. Choices A, B, and D are incorrect as they do not result from the correct calculation based on the given values.
Question 2 of 5
In the mechanical power equation P = E / t, power is measured in ___________.
Correct Answer: D
Rationale: In the mechanical power equation P = E / t, power is measured in watts. Watts are the standard unit of power in the International System of Units (SI), named after the Scottish engineer James Watt. Watts are defined as joules per second, reflecting the rate at which energy is transferred or converted. Ohms (choice A) are the unit of electrical resistance, Joules (choice B) are the unit of energy, and volts (choice C) are the unit of electric potential difference. Therefore, the correct answer is watts as it directly relates to power in the given equation.
Question 3 of 5
A spring has a spring constant of 20 N/m. How much force is needed to compress the spring from 40 cm to 30 cm?
Correct Answer: D
Rationale: The change in length of the spring is 40 cm - 30 cm = 10 cm = 0.10 m. The force required to compress or stretch a spring is given by Hooke's Law: F = k x, where F is the force, k is the spring constant (20 N/m in this case), and x is the change in length (0.10 m). Substituting the values into the formula: F = 20 N/m 0.10 m = 2 N. Therefore, the correct answer is 2 N. Choice A (200 N) is incorrect because it miscalculates the force. Choice B (80 N) is incorrect as it does not apply Hooke's Law correctly. Choice C (5 N) is incorrect as it underestimates the force required.
Question 4 of 5
What is the diameter of a loop if its radius is 6 meters?
Correct Answer: B
Rationale: The diameter of a loop is calculated by multiplying the radius by 2. Since the radius is 6 meters, the diameter is 6 2 = 12 meters. Therefore, the correct answer is 12 meters. Choice A (6 m) is the radius, not the diameter. Choices C (18 m) and D (36 m) are incorrect as they do not reflect the correct calculation for determining the diameter of a loop.
Question 5 of 5
A 120-volt heat lamp draws 25 amps of current. What is the lamp's resistance?
Correct Answer: D
Rationale: To find the resistance of the lamp, we use Ohm's Law, which states that resistance (R) is equal to voltage (V) divided by current (I), expressed as: R = V / I. Given that the voltage (V) is 120 volts and the current (I) is 25 amps, we substitute these values into the formula: R = 120 V / 25 A = 4.8 ohms. Therefore, the resistance of the lamp is 4.8 ohms. Choice A, 96 ohms, is incorrect as it is not the result of the correct calculation. Choice B, 104 ohms, is incorrect as it does not match the calculated resistance. Choice C, 150 ohms, is incorrect as it is not the correct resistance value obtained through the calculation.