Correct Answer: D

Rationale: Dry ice (solid carbon dioxide) provides the best example of sublimation outside of the laboratory. When dry ice is exposed to normal atmospheric conditions, it changes directly from a solid to a gas without passing through a liquid phase. This process is commonly observed in everyday situations such as creating 'smoke' or 'fog' effects. Choices A, B, and C (Iron, Silver, and Salt crystal) do not undergo sublimation. Iron and Silver melt and then vaporize, while Salt crystal dissolves in water, and the resulting solution evaporates, which involves a liquid phase.

Correct Answer: A

Rationale: Velocity is calculated as the displacement divided by the time taken to cover that displacement. In this case, the object moves 100 meters in 10 seconds. Therefore, the velocity is 100 m / 10 s = 10 m/s. Choice B, 90 m/s, is incorrect as it doesn't match the calculated velocity. Choice C, 110 m/s, is incorrect as it is higher than the calculated velocity. Choice D, 1,000 m/s, is incorrect as it is significantly higher than the calculated velocity.

Correct Answer: B

Rationale: The drag force experienced by an object moving through a fluid depends on multiple factors, including the object's shape, size, velocity, and the fluid's properties such as viscosity and density. Choices A, C, and D are incorrect because drag force is not solely determined by the object's shape and size, depth of submersion, or buoyant force acting on the object. The primary factors affecting drag force are the fluid properties and the object's velocity. Therefore, the correct answer is B.

Correct Answer: B

Rationale: In a U-tube manometer, the side connected to a pressurized system will experience a decrease in fluid level due to the pressure exerted by the system. This pressure forces the fluid down, causing the fluid level to decrease. Therefore, choice B is correct. Choices A and C are incorrect because the fluid level will not remain the same or increase when connected to a pressurized system. Choice D is incorrect as the type of fluid used does not determine the direction of the fluid movement in response to pressure.

Correct Answer: D

Rationale: The wire with the greatest resistance is the one with the smallest diameter, as resistance is inversely proportional to cross-sectional area. Gauge 4 with a 5.19 mm diameter has the smallest diameter and, therefore, the greatest resistance. Choice A, B, and C have larger diameters compared to choice D, so they would have lower resistance values.