In open-channel flow, a critical property is the free surface, which refers to the:

Correct Answer: B

Rationale: The free surface in open-channel flow refers to the interface between the liquid and the surrounding gas, typically the atmosphere. This interface is critical as it determines the boundary between the liquid flow and the open environment. Option A is incorrect as it refers to the liquid-container wall interface, not the free surface. Option C is incorrect because it represents the bottom of the channel, not the free surface. Option D is incorrect as it describes the region of highest velocity within the liquid, not the free surface. Therefore, the correct choice is B.

Correct Answer: A

Rationale: Mass is an intrinsic property of a substance that remains constant regardless of temperature changes. It is a measure of the amount of matter in an object, and this quantity does not vary with temperature or the environment in which the substance is located. The conservation of mass in chemistry dictates that mass is neither created nor destroyed, making it independent of temperature variations.\nVolume, on the other hand, changes with temperature due to thermal expansion or contraction. Phase can change with temperature, leading to transitions between solid, liquid, and gas states. Solubility is affected by temperature changes as it influences the ability of a substance to dissolve in a solvent.

Correct Answer: B

Rationale: Fluid dynamics is the study of fluids in motion and their behavior under different conditions, including how they flow, mix, and interact with their surroundings. It focuses on the dynamic aspects of fluids rather than their static properties when at rest, which is the realm of fluid statics. Phase transitions of fluids between liquid, gas, and solid states are more related to thermodynamics than fluid dynamics. While engineering applications involve fluid dynamics, the field itself is more specialized in studying the movement and behavior of fluids.

Correct Answer: B

Rationale: Ohm's law states that the ratio of the potential difference (voltage) between the ends of a conductor to the current flowing through it is a constant. Mathematically, this is represented as V = I x R, where V is voltage, I is current, and R is the constant resistance. Therefore, the correct conclusion that can be drawn from Ohm's law is that the ratio of the potential difference between the ends of a conductor to current is a constant, denoted as R. This relationship is fundamental to understanding the behavior of electrical circuits and the effect of resistance on voltage and current. Choice A is incorrect because Ohm's law actually states that voltage and current are directly proportional when resistance is constant. Choice C is incorrect because voltage is not the amount of charge that passes through a point per second; rather, it is the electric potential energy per unit charge. Choice D is incorrect because although power (P) can be calculated by multiplying current (I) by voltage (V), this is not a conclusion directly drawn from Ohm's law.

Correct Answer: C

Rationale: In a series circuit, the total resistance is the sum of the individual resistances. With a total voltage of 9 V and a current of 1 A, we can use Ohm's Law (V = I R) to find the total resistance: Total resistance = 9 V / 1 A = 9 ohms. Since the resistors are identical and wired in series, the total resistance is evenly divided among the three resistors: Resistance of each resistor = 9 ohms / 3 = 3 ohms. Thus, the resistance of each resistor is 3 ohms. Therefore, the correct answer is 3 ohms. Choice A, 9 ohms, is incorrect because this would be the total resistance of all three resistors combined in series. Choice B, 6 ohms, is incorrect as it does not account for the equal distribution of resistance in a series circuit. Choice D, 1 ohm, is incorrect as it is too low for resistors in series with a total resistance of 9 ohms.

Correct Answer: C

Rationale: The gravitational force between two objects is inversely proportional to the square of the distance between them. When the distance is halved, the new force of attraction will be 12 units x (1/(0.5)^2) = 12 units x 4 = 24 units. Therefore, the correct answer is C. Choice A and B are incorrect as they do not consider the inverse square law of gravitational force. Choice D is incorrect as reducing the distance between the objects does not lead to a squared increase in force.

Correct Answer: B

Rationale: In a transverse wave, particles of the medium move perpendicular to the direction of energy transport. When the wave transports energy from north to south, the particles in the medium oscillate up and down, causing them to move both northward and southward. Choice A is incorrect because the particles move in both directions, not only from north to south. Choices C and D are incorrect as they mention directions that are not relevant to the scenario described in the question.

Correct Answer: A

Rationale: Coulomb's law is a fundamental principle in physics that deals with the electrostatic interaction between charged particles. It states that the force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. This law is crucial in understanding and predicting the behavior of electrically charged objects. Choices B, C, and D are incorrect because Coulomb's law specifically focuses on electrostatic interactions between charges, not rigid body motion, heat conduction, or universal gravitation.

Correct Answer: C

Rationale: When a non-Newtonian fluid exhibits shear thickening behavior, its viscosity increases with increasing shear rate. This means that as more force is applied to the fluid, its resistance to flow also increases, resulting in a higher viscosity. This phenomenon is opposite to shear thinning, where viscosity decreases with increasing shear rate. Therefore, in the case of shear thickening behavior, the correct answer is that the fluid's viscosity increases with increasing shear rate. Choices A, B, and D are incorrect because shear thickening behavior specifically involves an increase in viscosity with increasing shear rate, not remaining constant, decreasing, or depending on applied pressure.