In an adiabatic process, there is:

Correct Answer: A

Rationale: In an adiabatic process, choice A is correct because adiabatic processes involve no heat transfer between the system and its surroundings (Q = 0). This lack of heat transfer is a defining characteristic of adiabatic processes. Choices B, C, and D do not accurately describe an adiabatic process. Choice B refers to an isothermal process where temperature remains constant, not adiabatic. Choice C describes an isobaric process with constant pressure, not specific to adiabatic processes. Choice D mentions the conservation of energy but does not directly relate to the absence of heat transfer in adiabatic processes.

Correct Answer: C

Rationale: For a closed system undergoing a cyclic process and returning to its initial state, the net work done (Wnet) over the entire cycle can be positive, negative, or zero. This is because the work done is determined by the area enclosed by the cycle on a P-V diagram, and this area can be above, below, or intersecting the zero work axis, leading to positive, negative, or zero net work done. Choice A is incorrect because Wnet is not always positive; it depends on the specific path taken on the P-V diagram. Choice B is incorrect as Wnet is not always negative; it varies based on the enclosed area. Choice D is incorrect because Wnet is not necessarily equal to the total heat transferred into the system; it depends on the specifics of the cycle and is not a direct relationship.

Correct Answer: C

Rationale: In longitudinal waves, the vibrations of particles occur in the same direction as the wave propagates. This means the particles move back and forth in the direction of the wave, creating compressions and rarefactions along the wave. Therefore, the correct choice is C, in the same direction as the wave. Choice A is incorrect because transverse waves, not longitudinal waves, have vibrations at right angles to the direction of wave propagation. Choice B is incorrect as it describes the motion in transverse waves. Choice D is incorrect as it is an inaccurate representation of how longitudinal waves propagate.

Correct Answer: D

Rationale: The correct answer is D: 'Cannot be created or destroyed.' The law of conservation of energy states that energy cannot be created or destroyed; it can only be transformed from one form to another. This principle is a fundamental concept in physics and is supported by numerous observations and experiments. Choices A, B, and C are incorrect because they do not align with the law of conservation of energy. Energy is a conserved quantity, meaning its total amount remains constant over time, even though it can change forms.

Correct Answer: D

Rationale: To determine the amperes drawn by the hair dryer, we use the formula: Amperes = Watts / Volts. The hair dryer operates at 1,525 watts with 110 volts. Dividing 1,525 watts by 110 volts yields 13.9 amperes. Therefore, the correct answer is 13.9 amperes. Choices A, B, and C are incorrect because they do not result from the correct calculation using the formula.

Correct Answer: C

Rationale: The energy use of an appliance can be expressed using the formula Energy = Power Time. In this formula, Energy represents the amount of electricity consumed by the appliance, Power indicates the rate at which the appliance uses electricity (measured in watts), and Time represents the duration for which the appliance is being used (measured in hours). By multiplying the power rating of the appliance by the time it is in use, one can calculate the total energy consumed. Option C is the correct choice because it accurately represents the relationship between power, time, and energy. Choices A, B, and D present incorrect representations of the relationship between energy, power, and time, making them wrong answers.

Correct Answer: C

Rationale: During adiabatic compression, the gas's temperature increases. This is because no heat is exchanged with the surroundings, and all the work done on the gas results in an increase in internal energy. Choice A is incorrect because the temperature does not remain constant during adiabatic compression. Choice B is incorrect as the temperature does not decrease. Choice D is incorrect as the behavior of the gas's temperature during adiabatic compression is predictable based on the principles of thermodynamics.

Correct Answer: C

Rationale: To find the image distance of the candle, we use the mirror formula: 1/f = 1/do + 1/di, where f is the focal length, do is the object distance, and di is the image distance. In this case, the focal length f = 10 cm and the object distance do = 20 cm. Substituting these values into the formula gives us 1/10 = 1/20 + 1/di. Solving for di, we get di = 60 cm. Therefore, the image distance of the candle is 60 cm. Choice A (20 cm) is incorrect because it represents the object distance, not the image distance. Choice B (40 cm) is incorrect as it does not consider the mirror formula calculation. Choice D (75 cm) is incorrect as it does not match the correct calculation based on the mirror formula.

Correct Answer: D

Rationale: The momentum of an object is calculated by multiplying its mass by its velocity. The momentum formula is p = m v, where p is momentum, m is mass, and v is velocity. Comparing the momentum of each vehicle: A: 9,000 kg 3 m/s = 27,000 kg·m/s B: 2,000 kg 24 m/s = 48,000 kg·m/s C: 1,500 kg 29 m/s = 43,500 kg·m/s D: 500 kg 89 m/s = 44,500 kg·m/s. Therefore, the glider (500-kg) traveling at 89 m/s has the greatest momentum of 44,500 kg·m/s, making it the correct choice. Options A, B, and C have lower momentum values compared to option D, proving that the 500-kg glider traveling at 89 m/s has the highest momentum among the given vehicles.