If a force of 12 kg stretches a spring by 3 cm, how far will the spring stretch when a force of 30 kg is applied?

Correct Answer: B

Rationale: The extension of a spring is directly proportional to the force applied. In this case, the force increases from 12 kg to 30 kg, which is a 2.5 times increase. Therefore, the extension of the spring will also increase by 2.5 times. Given that the spring stretches 3 cm with a force of 12 kg, multiplying 3 cm by 2.5 gives us the extension of the spring when a force of 30 kg is applied, which equals 7.5 cm. Therefore, the correct answer is 7.5 cm. Choice A, 6 cm, is incorrect because it does not account for the proportional increase in force. Choice C, 9 cm, and Choice D, 10.5 cm, are incorrect as they overestimate the extension of the spring by not considering the direct proportionality between force and extension.

Correct Answer: B

Rationale: The correct answer is B. Metal detectors work based on the principle of electromotive force induced by a changing magnetic field. When a metal object comes into contact with the detector's magnetic field, it disrupts the field, inducing a current in the metal that can be detected. This principle allows metal detectors to identify the presence of metallic objects without relying on the static presence of a permanent magnet, the high electrical conductivity of metals, or the thermal signature of the objects. Choice A is incorrect because metal detectors do not rely on a static magnet but on the interaction of metals with a changing magnetic field. Choice C is incorrect because while metals do have high electrical conductivity, this is not the principle underlying metal detectors. Choice D is incorrect because metal detectors do not operate based on the thermal signature of objects, but rather on their interaction with magnetic fields.

Correct Answer: D

Rationale: The correct answer is D: 'Cannot be created or destroyed.' The law of conservation of energy states that energy cannot be created or destroyed; it can only be transformed from one form to another. This principle is a fundamental concept in physics and is supported by numerous observations and experiments. Choices A, B, and C are incorrect because they do not align with the law of conservation of energy. Energy is a conserved quantity, meaning its total amount remains constant over time, even though it can change forms.

Correct Answer: C

Rationale: The magnetic field lines inside a solenoid resemble the field lines around a permanent bar magnet. Both a solenoid and a bar magnet have north and south poles, resulting in a similar pattern of magnetic field lines. A single straight current-carrying wire produces a different field pattern because it has no coil structure like a solenoid. A horseshoe magnet has a unique field shape due to its pole arrangement, different from the uniform field pattern of a solenoid. A flat sheet conductor does not exhibit the same magnetic field characteristics as a solenoid, as it lacks the coil shape and alignment of a solenoid's magnetic field.

Correct Answer: C

Rationale: When electrical current flows through a circuit with resistance, energy is lost in the form of heat due to the resistance encountered by the electrons. This dissipation of energy as heat is a common phenomenon in electrical circuits and is known as Joule heating. Therefore, the correct answer is 'Heat.' Light, sound, and mechanical work are not typical forms in which energy is lost due to electrical resistance. Light is not a direct result of energy dissipation in electrical circuits, sound is not a form of energy dissipation in this context, and mechanical work pertains to the application of physical force and not the dissipation of energy due to resistance.

Correct Answer: A

Rationale: Laminar flow is characterized by the smooth, parallel movement of fluid particles along layers in a predictable manner. This flow regime occurs at low velocities and is in contrast to turbulent flow, where fluid particles exhibit erratic and chaotic motion. The viscosity of the fluid does not hinder laminar flow; instead, it influences the resistance to flow. Incompressibility is a property of fluids but does not specifically define laminar flow. Therefore, the correct answer is A as it accurately describes the behavior of fluid particles in laminar flow, making B, C, and D incorrect.

Correct Answer: A

Rationale: When the specific gravity (SG) of an object is greater than 1, it indicates that the object is denser than the reference fluid, which is often water. According to Archimedes' principle, an object with SG > 1 will experience a net buoyant force acting upwards when submerged in the fluid. This is because the buoyant force is greater than the weight of the object, causing it to float. Therefore, the correct answer is A: 'Experience a net buoyant force acting upwards.' Objects with SG < 1 would sink as they are less dense than the fluid, while objects with SG = 1 would be neutrally buoyant, neither sinking nor floating.

Correct Answer: D

Rationale: The displacement of an object is the change in position from the starting point to the ending point, regardless of the path taken. In this case, the airplane returns to its original position after traveling 500 miles northeast and then 500 miles southwest. Therefore, the displacement is 0 miles. However, the distance traveled is the total path covered, which is 500 miles northeast plus 500 miles southwest, for a total of 1,000 miles. Choice A is incorrect because the displacement is not the sum of the distances traveled. Choice B is incorrect as it incorrectly states that both the displacement and the distance traveled are 1,000 miles. Choice C is incorrect as it states that both the displacement and the distance traveled are 0 miles, which is not the case.

Correct Answer: D

Rationale: Work done is calculated using the formula: Work = Force x Distance. In this case, the force applied is 15 N and the distance covered is 3 m. Thus, work done = 15 N x 3 m = 45 Nâ‹…m. Therefore, the correct answer is 45 Nâ‹…m. Choice A (5 W) is incorrect because work is measured in joules (J) or newton-meters (Nâ‹…m), not in watts (W). Choice B (5 Nâ‹…m) is incorrect as it miscalculates the work by not multiplying the force by the distance. Choice C (45 W) is incorrect because work is not measured in watts (W) but in newton-meters (Nâ‹…m).