Faraday's law of electromagnetic induction states that a changing magnetic field in a conductor induces a/an:

Correct Answer: B

Rationale: Faraday's law of electromagnetic induction states that a changing magnetic field induces an electromotive force in a conductor. This electromotive force is responsible for generating electricity in power plants and various electrical devices. The induced current is a result of the changing magnetic field, not an increase in resistance (choice A), static electric charge (choice C), or a decrease in capacitance (choice D). Hence, the correct answer is B.

Correct Answer: B

Rationale: Faraday's law of electromagnetic induction states that a changing magnetic field induces an electromotive force in a conductor. This electromotive force is responsible for generating electricity in power plants and various electrical devices. The induced current is a result of the changing magnetic field, not an increase in resistance (choice A), static electric charge (choice C), or a decrease in capacitance (choice D). Hence, the correct answer is B.

Correct Answer: A

Rationale: The period represents the time for one complete cycle of the wing beating. To calculate the period, you take the reciprocal of the frequency. In this case, with the wings beating at 25 beats per second, the period is 1/25, which equals 0.04 seconds. Therefore, choice A, 0.04 seconds, is correct. Choices B, C, and D are incorrect because they do not reflect the correct calculation of the period based on the given frequency of 25 beats per second.

Correct Answer: A

Rationale: In an electrically neutral atom, the number of electrons is equal to the number of protons. Electrons carry a negative charge, protons carry a positive charge, and neutrons are neutral. Since the atom is electrically neutral, the positive charge of the protons must balance the negative charge of the electrons, making the numbers of electrons and protons equal. Choice B is incorrect because protons are not equal to neutrons in an atom. Choice C is incorrect because neutrons are not always greater than protons, and choice D is incorrect because electrons are not always less than protons in an atom.

Correct Answer: C

Rationale: Marilyn's displacement is calculated based on her final position relative to the starting point. She drives 1 mile to pick up her friend, then 5 miles more to the wedding, totaling 6 miles after returning to her home. So, the correct displacement is 8 miles south from her starting point (4 miles to the gift + 4 miles return + 1 mile to the friend + 5 miles to the wedding). The total distance traveled is 14 miles (adding all the distances). Choice A is incorrect because it miscalculates the displacement. Choice B is incorrect as it overestimates both the displacement and distance traveled. Choice D is incorrect as it underestimates the displacement.

Correct Answer: C

Rationale: The correct answer is C: Joule (J). The joule is the SI unit used to quantify the transfer of energy due to an applied force. It is defined as the work done when a force of one newton is applied over a distance of one meter. Newton (N) is the unit of force, not energy transfer. Meter per second (m/s) is the unit of speed, not energy transfer. Kilogram (kg) is the unit of mass, not energy transfer. Therefore, the correct unit for quantifying the transfer of energy due to an applied force is the joule (J).

Correct Answer: D

Rationale: The correct answer is D: Aluminum. The specific heat capacity of aluminum is 0.904 J/(g°C), which is approximately 4 times that of tin. For a material to require about twice as much heat as tin to increase the temperature by 1°C, it should have a specific heat capacity roughly double that of tin. Therefore, aluminum fits this criterion better than the other options. Gold has a much lower specific heat capacity than tin, so it would require less, not more, heat to increase the temperature by 1°C. Copper and Iron also have specific heat capacities lower than tin, making them incorrect choices for requiring twice as much heat as tin.

Correct Answer: A

Rationale: Work is calculated using the formula Work = Force x Distance. Given that 100 Nâ‹…m of work is done over 20 m, we can rearrange the formula to solve for Force. Force = Work / Distance. Plugging in the values, we get Force = 100 Nâ‹…m / 20 m = 5 N. Therefore, the force applied to the object that was moved is 5 N. Choice B (80 N) is incorrect because it doesn't match the calculated force of 5 N. Choice C (120 N) is incorrect as it is higher than the calculated force. Choice D (2,000 N) is incorrect as it is significantly higher than the correct force of 5 N.

Correct Answer: D

Rationale: When calculating an object's acceleration, you must divide the change in velocity by the change in time. Acceleration is defined as the rate of change of velocity with respect to time. By determining the ratio of the change in velocity to the change in time, you can ascertain how quickly the velocity of an object is changing, thereby finding its acceleration. Choice A is incorrect because acceleration is not calculated by dividing time by velocity. Choice B is incorrect as it describes multiplying velocity by time, which does not yield acceleration. Choice C is incorrect as finding the difference between time and velocity is not a method to calculate acceleration.