HESI A2
HESI A2 Physics Questions
Question 1 of 5
During adiabatic compression of a gas, what happens to its temperature?
Correct Answer: C
Rationale: During adiabatic compression, the gas's temperature increases. This is because no heat is exchanged with the surroundings, and all the work done on the gas results in an increase in internal energy. Choice A is incorrect because the temperature does not remain constant during adiabatic compression. Choice B is incorrect as the temperature does not decrease. Choice D is incorrect as the behavior of the gas's temperature during adiabatic compression is predictable based on the principles of thermodynamics.
Question 2 of 5
If a force of 12 kg stretches a spring by 3 cm, how far will the spring stretch when a force of 30 kg is applied?
Correct Answer: B
Rationale: The extension of a spring is directly proportional to the force applied. In this case, the force increases from 12 kg to 30 kg, which is a 2.5 times increase. Therefore, the extension of the spring will also increase by 2.5 times. Given that the spring stretches 3 cm with a force of 12 kg, multiplying 3 cm by 2.5 gives us the extension of the spring when a force of 30 kg is applied, which equals 7.5 cm. Therefore, the correct answer is 7.5 cm. Choice A, 6 cm, is incorrect because it does not account for the proportional increase in force. Choice C, 9 cm, and Choice D, 10.5 cm, are incorrect as they overestimate the extension of the spring by not considering the direct proportionality between force and extension.
Question 3 of 5
Two 5-ohm resistors are placed in series and wired into a 100-V power supply. What current flows through this circuit?
Correct Answer: B
Rationale: In a series circuit, the total resistance is the sum of the individual resistances. Therefore, the total resistance in this circuit is 5 ohms + 5 ohms = 10 ohms. Using Ohm's Law (V = I R), we can find the current (I) by dividing the voltage (V) by the total resistance (R). I = V / R = 100 V / 10 ohms = 10 A. Choice A (2 A) is incorrect because it does not account for the total resistance of the circuit. Choice C (20 A) and Choice D (50 A) are also incorrect as they provide values that are not consistent with the calculations based on the given values in the question.
Question 4 of 5
Surface tension, γ, is a property of fluids arising from:
Correct Answer: A
Rationale: Surface tension, represented by symbol γ, is caused by the cohesive forces between molecules in a liquid. These intermolecular forces, such as Van der Waals forces, hydrogen bonding, and dipole-dipole interactions, create a 'skin' at the surface of the liquid, giving rise to the property of surface tension. Gravitational attraction, viscous dissipation, and pressure differentials within the fluid do not directly contribute to surface tension. Therefore, the correct answer is A.
Question 5 of 5
The frequency of an alternating current (AC) refers to the number of times it changes direction per unit time. This is measured in:
Correct Answer: A
Rationale: The frequency of an alternating current (AC) is measured in Hertz (Hz), which denotes the number of times the current changes direction per unit time. Hertz is the unit for frequency, while amperes measure current, volts measure voltage, and ohms measure resistance. Therefore, the correct answer is Hertz (Hz). Choices B, C, and D are incorrect because amperes measure current intensity, volts measure voltage potential, and ohms measure resistance, not the frequency of an alternating current.
Similar Questions
Join Our Community Today!
Join Over 10,000+ nursing students using Nurselytic. Access Comprehensive study Guides curriculum for HESI A2-HESI A2 and 3000+ practice questions to help you pass your HESI A2-HESI A2 exam.
Subscribe for Unlimited Access