An object with a charge of 3 μC is placed 30 cm from another object with a charge of 2 μC. What is the magnitude of the resulting force between the objects?

Correct Answer: B

Rationale: To find the magnitude of the resulting force between two charges, we use Coulomb's Law: F = k (|q1 q2|) / r² Where: F is the force k is Coulomb's constant (8.99 10⁹ N·m²/C²) q1 and q2 are the charges r is the distance between the charges Plugging in the values: F = (8.99 10⁹) (3 10⁻⁶) (2 10⁻⁶) / (0.3)² = 0.18 N. Therefore, the magnitude of the resulting force is 0.18 N.

Correct Answer: B

Rationale: To find the speed of the waves, we use the formula: speed = wavelength / period. The wavelength is the horizontal distance between adjacent crests, which is 9 meters in this case. The period is the time it takes for one wave to pass a fixed point, given as 5 seconds. Therefore, speed = 9 meters / 5 seconds = 1.8 m/s. Choice A (1.2 m/s) is incorrect because it miscalculates the speed. Choice C (2.0 m/s) and Choice D (2.4 m/s) are incorrect as they do not correctly calculate the speed using the provided data.

Correct Answer: C

Rationale: The formula for calculating kinetic energy is KE = 0.5 mass velocity². Given the mass of the wagon is 500 kg and the velocity is 10 m/s, we can substitute these values into the formula: KE = 0.5 500 kg (10 m/s)² = 0.5 500 kg 100 m²/s² = 25,000 J or 2.5 10⁴ J. Therefore, the kinetic energy of the 500-kg wagon moving at 10 m/s is 2.5 10⁴ J. Choice A (50 J) is incorrect because it is too low; Choice B (250 J) is incorrect as it does not match the correct calculation; Choice D (5.0 10^5 J) is incorrect as it is too high. The correct answer is C (2.5 10^4 J).

Correct Answer: A

Rationale: When the 12 N force stretches the spring from 25 cm to 28 cm, it causes a length increase of 28 cm - 25 cm = 3 cm. Therefore, each newton of applied force causes an extension of 3 cm / 12 N = 0.25 cm/N. If the force is doubled to 24 N, the spring would extend by 24 N 0.25 cm/N = 6 cm more than its original length of 25 cm. Thus, the new length of the spring would be 25 cm + 6 cm = 31 cm. Choice A, 31 cm, is the correct answer as calculated. Choices B, C, and D are incorrect as they do not consider the relationship between force and extension in the spring, leading to incorrect calculations of the new length.

Correct Answer: D

Rationale: In a power plant system, the components directly involved in the energy conversion process are considered part of the system. The fuel being burned provides the heat source, the working fluid transfers this heat energy, and the turbine converts it into mechanical energy to generate electricity. The surrounding air, while it may interact with the system, is not a component that directly participates in the energy conversion process within the power plant system. Therefore, the correct answer is D - The surrounding air. Choices A, B, and C are essential components of a power plant system as they play direct roles in the energy conversion process, unlike the surrounding air.

Correct Answer: A

Rationale: Work is calculated using the formula Work = Force x Distance. Given that 100 Nâ‹…m of work is done over 20 m, we can rearrange the formula to solve for Force. Force = Work / Distance. Plugging in the values, we get Force = 100 Nâ‹…m / 20 m = 5 N. Therefore, the force applied to the object that was moved is 5 N. Choice B (80 N) is incorrect because it doesn't match the calculated force of 5 N. Choice C (120 N) is incorrect as it is higher than the calculated force. Choice D (2,000 N) is incorrect as it is significantly higher than the correct force of 5 N.

Correct Answer: B

Rationale: Fluid dynamics is the study of fluids in motion and their behavior under different conditions, including how they flow, mix, and interact with their surroundings. It focuses on the dynamic aspects of fluids rather than their static properties when at rest, which is the realm of fluid statics. Phase transitions of fluids between liquid, gas, and solid states are more related to thermodynamics than fluid dynamics. While engineering applications involve fluid dynamics, the field itself is more specialized in studying the movement and behavior of fluids.

Correct Answer: C

Rationale: The correct answer is C: Joule (J). The joule is the SI unit used to quantify the transfer of energy due to an applied force. It is defined as the work done when a force of one newton is applied over a distance of one meter. Newton (N) is the unit of force, not energy transfer. Meter per second (m/s) is the unit of speed, not energy transfer. Kilogram (kg) is the unit of mass, not energy transfer. Therefore, the correct unit for quantifying the transfer of energy due to an applied force is the joule (J).

Correct Answer: C

Rationale: Marilyn's displacement is calculated based on her final position relative to the starting point. She drives 1 mile to pick up her friend, then 5 miles more to the wedding, totaling 6 miles after returning to her home. So, the correct displacement is 8 miles south from her starting point (4 miles to the gift + 4 miles return + 1 mile to the friend + 5 miles to the wedding). The total distance traveled is 14 miles (adding all the distances). Choice A is incorrect because it miscalculates the displacement. Choice B is incorrect as it overestimates both the displacement and distance traveled. Choice D is incorrect as it underestimates the displacement.