Correct Answer: D

Rationale: The displacement of an object is the change in position from the starting point to the ending point, regardless of the path taken. In this case, the airplane returns to its original position after traveling 500 miles northeast and then 500 miles southwest. Therefore, the displacement is 0 miles. However, the distance traveled is the total path covered, which is 500 miles northeast plus 500 miles southwest, for a total of 1,000 miles. Choice A is incorrect because the displacement is not the sum of the distances traveled. Choice B is incorrect as it incorrectly states that both the displacement and the distance traveled are 1,000 miles. Choice C is incorrect as it states that both the displacement and the distance traveled are 0 miles, which is not the case.

Correct Answer: D

Rationale: The correct answer is D: Kinetic energy. Potential energy is converted into kinetic energy as the vehicle moves downhill. Kinetic energy is the energy possessed by a moving object. Thermal energy is not produced in this scenario because the energy transformation is mainly from potential to kinetic energy, not involving heat generation. Choices A, B, and C are incorrect because the primary energy transformation in this scenario is from potential to kinetic energy, not involving thermal energy.

Correct Answer: D

Rationale: When batteries are connected in series, their voltages add up. Therefore, the total voltage of the circuit with four 5 V batteries connected in series will be 5 V + 5 V + 5 V + 5 V = 20 V. Choices A, B, and C are incorrect because the voltages of the batteries add up in series, resulting in a total of 20 V.

Correct Answer: C

Rationale: For a closed system undergoing a cyclic process and returning to its initial state, the net work done (Wnet) over the entire cycle can be positive, negative, or zero. This is because the work done is determined by the area enclosed by the cycle on a P-V diagram, and this area can be above, below, or intersecting the zero work axis, leading to positive, negative, or zero net work done. Choice A is incorrect because Wnet is not always positive; it depends on the specific path taken on the P-V diagram. Choice B is incorrect as Wnet is not always negative; it varies based on the enclosed area. Choice D is incorrect because Wnet is not necessarily equal to the total heat transferred into the system; it depends on the specifics of the cycle and is not a direct relationship.

Correct Answer: C

Rationale: In a compressible fluid, the speed of sound (c) depends on both the fluid's density (ρ) and Bulk modulus. Density affects the compressibility of the fluid, while Bulk modulus represents the fluid's resistance to compression and plays a crucial role in determining the speed of sound in a compressible medium. Viscosity and surface tension do not directly impact the speed of sound in a compressible fluid subjected to rapid pressure changes. Therefore, the correct answer is C.