A wave in a rope travels at 12 m/s and has a wavelength of 2 m. What is the frequency?

Questions 44

HESI A2

HESI A2 Test Bank

HESI A2 Physics Questions

Question 1 of 5

A wave in a rope travels at 12 m/s and has a wavelength of 2 m. What is the frequency?

Correct Answer: B

Rationale: The frequency of a wave is calculated using the formula: frequency = speed / wavelength. In this case, the speed of the wave is 12 m/s and the wavelength is 2 m. Therefore, the frequency is calculated as 12 m/s / 2 m = 6 Hz. Choice A (38.4 Hz), Choice C (4.6 Hz), and Choice D (3.75 Hz) are incorrect as they do not result from the correct calculation using the given values.

Question 2 of 5

How might the energy use of an appliance be expressed?

Correct Answer: C

Rationale: The energy use of an appliance can be expressed using the formula Energy = Power Time. In this formula, Energy represents the amount of electricity consumed by the appliance, Power indicates the rate at which the appliance uses electricity (measured in watts), and Time represents the duration for which the appliance is being used (measured in hours). By multiplying the power rating of the appliance by the time it is in use, one can calculate the total energy consumed. Option C is the correct choice because it accurately represents the relationship between power, time, and energy. Choices A, B, and D present incorrect representations of the relationship between energy, power, and time, making them wrong answers.

Question 3 of 5

If a force of 12 kg stretches a spring by 3 cm, how far will the spring stretch when a force of 30 kg is applied?

Correct Answer: B

Rationale: The extension of a spring is directly proportional to the force applied. In this case, the force increases from 12 kg to 30 kg, which is a 2.5 times increase. Therefore, the extension of the spring will also increase by 2.5 times. Given that the spring stretches 3 cm with a force of 12 kg, multiplying 3 cm by 2.5 gives us the extension of the spring when a force of 30 kg is applied, which equals 7.5 cm. Therefore, the correct answer is 7.5 cm. Choice A, 6 cm, is incorrect because it does not account for the proportional increase in force. Choice C, 9 cm, and Choice D, 10.5 cm, are incorrect as they overestimate the extension of the spring by not considering the direct proportionality between force and extension.

Question 4 of 5

A circular running track has a circumference of 2,500 meters. What is the radius of the track?

Correct Answer: B

Rationale: The radius of a circular track can be calculated using the formula: Circumference = 2 π radius. Given that the circumference of the track is 2,500 m, we can plug this into the formula and solve for the radius: 2,500 = 2 π radius. Dividing both sides by 2π gives: radius = 2,500 / (2 3.1416) ≈ 397.89 m. Therefore, the closest answer is 400 m, making option B the correct choice. Option A (1,000 m) is too large, option C (25 m) is too small, and option D (12 m) is significantly smaller than the calculated radius.

Question 5 of 5

Two 5-ohm resistors are placed in series and wired into a 100-V power supply. What current flows through this circuit?

Correct Answer: B

Rationale: In a series circuit, the total resistance is the sum of the individual resistances. Therefore, the total resistance in this circuit is 5 ohms + 5 ohms = 10 ohms. Using Ohm's Law (V = I R), we can find the current (I) by dividing the voltage (V) by the total resistance (R). I = V / R = 100 V / 10 ohms = 10 A. Choice A (2 A) is incorrect because it does not account for the total resistance of the circuit. Choice C (20 A) and Choice D (50 A) are also incorrect as they provide values that are not consistent with the calculations based on the given values in the question.

Access More Questions!

HESI A2 Basic


$99/ 30 days

HESI A2 Premium


$150/ 90 days

Similar Questions