Questions 9

HESI A2

HESI A2 Test Bank

HESI A2 Physics Questions

Question 1 of 5

A solenoid is a long, tightly wound coil of wire that acts like a bar magnet when current flows through it. The magnetic field lines inside a solenoid are most similar to the field lines around:

Correct Answer: C

Rationale: The magnetic field lines inside a solenoid resemble the field lines around a permanent bar magnet. Both a solenoid and a bar magnet have north and south poles, resulting in a similar pattern of magnetic field lines. A single straight current-carrying wire produces a different field pattern because it has no coil structure like a solenoid. A horseshoe magnet has a unique field shape due to its pole arrangement, different from the uniform field pattern of a solenoid. A flat sheet conductor does not exhibit the same magnetic field characteristics as a solenoid, as it lacks the coil shape and alignment of a solenoid's magnetic field.

Question 2 of 5

A key parameter in fluid selection is specific gravity (SG). For a submerged object in a reference fluid (often water), SG = ρ_object / ρ_reference. An object with SG > 1 will:

Correct Answer: A

Rationale: When the specific gravity (SG) of an object is greater than 1, it indicates that the object is denser than the reference fluid, which is often water. According to Archimedes' principle, an object with SG > 1 will experience a net buoyant force acting upwards when submerged in the fluid. This is because the buoyant force is greater than the weight of the object, causing it to float. Therefore, the correct answer is A: 'Experience a net buoyant force acting upwards.' Objects with SG < 1 would sink as they are less dense than the fluid, while objects with SG = 1 would be neutrally buoyant, neither sinking nor floating.

Question 3 of 5

What characterizes laminar flow?

Correct Answer: A

Rationale: Laminar flow is characterized by the smooth, parallel movement of fluid particles along layers in a predictable manner. This flow regime occurs at low velocities and is in contrast to turbulent flow, where fluid particles exhibit erratic and chaotic motion. The viscosity of the fluid does not hinder laminar flow; instead, it influences the resistance to flow. Incompressibility is a property of fluids but does not specifically define laminar flow. Therefore, the correct answer is A as it accurately describes the behavior of fluid particles in laminar flow, making B, C, and D incorrect.

Question 4 of 5

Which substance would be most affected by a change in temperature?

Correct Answer: C

Rationale: Hydrogen gas would be most affected by a change in temperature because gases have a greater expansion or contraction in volume with changes in temperature compared to liquids or solids. When the temperature of hydrogen gas increases, its molecules gain kinetic energy and move faster, causing the gas to expand and its volume to increase. Conversely, when the temperature decreases, the gas molecules lose kinetic energy and move slower, leading to a decrease in volume. This property makes hydrogen gas highly sensitive to temperature changes compared to liquid nitrogen, salt crystals, or iron filings. Liquid nitrogen, salt crystals, and iron filings are less affected by temperature changes because their particles are closer together and have lower kinetic energy, resulting in minimal volume changes with temperature fluctuations.

Question 5 of 5

When a hot cup of coffee is placed on a cold table, heat transfer primarily occurs through which process?

Correct Answer: B

Rationale: When a hot cup of coffee is placed on a cold table, heat transfer primarily occurs through conduction. Conduction is the process of heat transfer through direct contact between objects at different temperatures. In this scenario, the heat from the hot coffee cup is transferred to the cold table through direct contact, making conduction the primary mode of heat transfer. Choice A (Radiation) is incorrect because radiation is the transfer of heat through electromagnetic waves, which is not the primary mode of heat transfer in this scenario. Choice C (Convection within the coffee) is incorrect because convection is the transfer of heat through the movement of fluids, which is not the primary mode of heat transfer in this scenario. Choice D (A combination of conduction and convection) is incorrect because while convection may play a minor role due to air currents around the cup, the primary mode of heat transfer in this scenario is conduction.

Similar Questions

Join Our Community Today!

Join Over 10,000+ nursing students using Nurselytic. Access Comprehensive study Guides curriculum for HESI A2-HESI A2 and 3000+ practice questions to help you pass your HESI A2-HESI A2 exam.

Call to Action Image