HESI A2
HESI Exams Quizlet Physics Questions
Question 1 of 9
A constant force is exerted on a stationary object. In this scenario, work is:
Correct Answer: B
Rationale: Work is only done when a force causes displacement. Since the object is stationary, no displacement occurs, and therefore, no work is performed. Choice A is incorrect because work requires both force and displacement. Choice C is incorrect as there is no partial work - work is either done or not done. Choice D is incorrect as the scenario provided is clear - the object is stationary, so no work is being performed.
Question 2 of 9
An electromagnet is holding a 1,500-kg car at a height of 25 m above the ground. The magnet then experiences a power outage, and the car falls to the ground. Which of the following is false?
Correct Answer: C
Rationale: When the car falls to the ground, its potential energy is converted to kinetic energy as it accelerates downwards. Upon impact with the ground, the car's kinetic energy is dissipated in various forms, such as sound energy, heat, and deformation energy. Therefore, the car does not retain its initial potential energy of 367.5 kJ when it hits the ground. Choice A is true because the potential energy of the car can be calculated as mgh = 1500 kg * 9.8 m/s^2 * 25 m = 367,500 J = 367.5 kJ. Choice B is true because as the car falls, its potential energy is converted to kinetic energy. Choice D is true as the kinetic energy is eventually dissipated into other forms upon impact.
Question 3 of 9
When a junked car is compacted, which statement is true?
Correct Answer: C
Rationale: When a junked car is compacted, its volume decreases while its mass remains the same. As a result, the car's density increases because density is mass divided by volume. Choice A is incorrect because the mass of the car remains the same. Choice B is incorrect because the mass does not decrease. Choice D is incorrect because the density increases as the volume decreases, not decreases.
Question 4 of 9
Sublimation is the change in matter from solid to gas or gas to solid without passing through a liquid phase. Outside of the laboratory, which solid provides the best example of this?
Correct Answer: D
Rationale: Dry ice (solid carbon dioxide) provides the best example of sublimation outside of the laboratory. When dry ice is exposed to normal atmospheric conditions, it changes directly from a solid to a gas without passing through a liquid phase. This process is commonly observed in everyday situations such as creating 'smoke' or 'fog' effects. Choices A, B, and C (Iron, Silver, and Salt crystal) do not undergo sublimation. Iron and Silver melt and then vaporize, while Salt crystal dissolves in water, and the resulting solution evaporates, which involves a liquid phase.
Question 5 of 9
A plucked guitar string makes 80 vibrations in one second. What is the period?
Correct Answer: B
Rationale: The period is the time taken for one complete vibration of the guitar string. To find the period, you need to take the reciprocal of the frequency. Since the string makes 80 vibrations in one second, the period is 1/80 = 0.0125 seconds (or 0.025 s). Choice A is incorrect because it is the reciprocal of 80. Choice C is incorrect as it is 10 times the reciprocal of 80. Choice D is incorrect as it is 100 times the reciprocal of 80.
Question 6 of 9
A system undergoes an isobaric process (constant pressure). In this process, the work done (W) by the system is:
Correct Answer: B
Rationale: In an isobaric process (constant pressure), the work done is given by the formula W = PΔV, where P is the pressure and ΔV is the change in volume. If the volume does not change, the work done is zero, not negative. Choice A is incorrect as it states the work done is zero when the volume change is zero, which is the correct condition for zero work. Choice C is incorrect as it incorrectly suggests that the work done is negative in an isobaric process. Choice D is incorrect as the work done in an isobaric process is indeed dependent on the volume change and pressure.
Question 7 of 9
What is the primary factor responsible for generating lift on an airplane wing?
Correct Answer: D
Rationale: The primary factor responsible for generating lift on an airplane wing is the application of Bernoulli's principle. This principle states that the air moving over the curved top surface of the wing has to travel faster, leading to reduced pressure above the wing and creating lift. Engines provide thrust for propulsion, not lift. Buoyant forces are more relevant to lighter-than-air aircraft like balloons or airships, not airplanes. While drag reduction through streamlining is important for efficiency, it is not the primary factor in lift generation. Therefore, the correct answer is D.
Question 8 of 9
Archimedes' principle explains the ability to control buoyancy, allowing:
Correct Answer: C
Rationale: Archimedes' principle states that the upward buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object. Submarines control their buoyancy by adjusting the volume of water they displace, which allows them to submerge and resurface. Choice C is correct because it directly relates to the principle of buoyancy and how submarines utilize it. Choices A, B, and D are incorrect because they do not accurately reflect the application of Archimedes' principle in controlling buoyancy for submergence and resurfacing.
Question 9 of 9
Given the four wires described here, which would you expect to have the greatest resistance?
Correct Answer: D
Rationale: The wire with the greatest resistance is the one with the smallest diameter, as resistance is inversely proportional to cross-sectional area. Gauge 4 with a 5.19 mm diameter has the smallest diameter and, therefore, the greatest resistance. Choice A, B, and C have larger diameters compared to choice D, so they would have lower resistance values.