Correct Answer: A

Rationale: According to Newton's second law of motion, F=ma. Since the block has a mass of 0 kg, the force applied must be 0 N, as no force is needed to move an object with zero mass.

Correct Answer: D

Rationale: The purpose of a switch in a circuit is to allow the circuit to open and close. When the switch is turned on, it provides a complete path for the current to flow through the circuit. When the switch is turned off, it breaks the circuit, stopping the flow of current. This function of opening and closing the circuit using a switch is essential for controlling the flow of electricity in various electrical devices and systems. Choices A, B, and C are incorrect because a switch does not reverse the direction of current, increase voltage, or increase resistance in a circuit; its primary function is to open and close the circuit.

Correct Answer: B

Rationale: Power is defined as energy consumed per unit time. If the lamp consumes 60 Joules of energy per second, the power rating is 60 Watts. Therefore, choice B is correct. Choice A ('1 Watt') is incorrect because the lamp consumes 60 Joules per second, not 1 Joule per second. Choice C ('1/60 Joules') is incorrect as it does not represent the power rating. Choice D ('Impossible to determine without knowing the voltage') is incorrect because power can be calculated using energy consumption per unit time without needing to know the voltage.

Correct Answer: A

Rationale: Centripetal acceleration is calculated using the formula a = v² / r, where v = 10 m/s and r = 50 m. Substituting these values: a = (10 m/s)² / 50 m = 100 / 50 = 2 m/s². Therefore, the correct answer is 2 m/s². Choice B, 4 m/s², is incorrect because it is not the result of the correct calculation. Choice C, 5 m/s², is incorrect as it does not match the calculated centripetal acceleration. Choice D, 10 m/s², is incorrect as it does not reflect the correct calculation based on the given values.

Correct Answer: B

Rationale: In an isobaric process (constant pressure), the work done is given by the formula W = PΔV, where P is the pressure and ΔV is the change in volume. If the volume does not change, the work done is zero, not negative. Choice A is incorrect as it states the work done is zero when the volume change is zero, which is the correct condition for zero work. Choice C is incorrect as it incorrectly suggests that the work done is negative in an isobaric process. Choice D is incorrect as the work done in an isobaric process is indeed dependent on the volume change and pressure.